Dongfeng Tianjin 4X2 8tons Road Spraying Washing Sweeper Vacuum Cleaner Truck Cleaning Sweeping Truck Factory Direct Sales

Product Description

Hubei Zhongbang Intelligent Automobile Co., Ltd. is an important branch of CLW Group, located in Suizhou City, Hubei Province, China. CLW Group is one of the largest manufacturers authorized by the Ministry of Industry and Information Technology of China to produce specialized trucks, and is a designated manufacturer and seller of specialized vehicles by the Chinese government. We specialize in producing and selling various road sweeper series. Suitable for street sweepers, power plants, steel mills, property management, residential areas, logistics parks, etc. (there are also various types of pure electric new energy sweepers); Suitable for places with large amounts of dust and dry ash (such as coal yards, mining areas, transfer yards, chemical fiber industrial parks, brick factories, etc.), dry and wet dual-use vacuum cleaners, deep cleaning vehicles, road pollution removal vehicles (there are also various new energy pure electric series). The car models can be selected from Dongfeng, Foton, Jiefang, Jianghuai, Jiangling, China National Heavy Duty Truck Group, Shaanxi Automobile and other full range models.
Our company's road sweepers have high work efficiency and are highly favored by both new and old customers. The company's trucks have been sold to over 80 overseas countries and regions including China, Asia, Africa, South America, and the Middle East, such as Russia, Kazakhstan, Nigeria, Chile, Malaysia, and Argentina.

Product Description

SWEEPING TRUCK
Washing car is a road cleaning vehicle in the road sweeper series, with road cleaning, road cleaning curb and curb facade washing, low pressure washing, spray dust removal and other functions. The vehicle can be used as a road sweeper for road cleaning and suction; and as a high pressure flushing vehicle; the combination of road cleaning and high pressure flushing as a combination of cleaning, high pressure flushing and suction to meet the needs of different users. The vehicle can be widely used for the daily cleaning, washing and cleaning of main roads and viaduct roads.

Detailed Photos

 

Dongfeng Tianjin 4X2 8Tons Road Spraying Washing Sweeper Truck

Features
1. Four sweeper brush and sucker for sweeping combination with excellent sweeping ability
2. each side of the broom or brush can work at the same time, or work independently on each side
3. cleaning device mechanism is simple and reliable, which is hard to damage;
4. all stainless steel dust bins, water tanks,
5. hydraulic system core components are all imported;
6. cleaning system powered by auxiliary engine, which do not interfere with vehicle power.

Road Sweeper (sweeper truck) is one of the sanitation equipments. It is a new type of high-efficiency sweeping equipment integrating road sweeping, garbage recycling and transportation. It can be widely used in road highways, municipal and airport roads, urban residential areas, parks and other roads. Pavement sweepers not only clean trash, but also dust and purify the air medium on the road, which not only ensures the beauty of the road, maintains the sanitation of the environment, but also maintains the good working conditions of the road surface, and reduces and prevents traffic accidents. The occurrence and further extend the life of the road. It has become a trend to use pavement sweepers for road maintenance in China.

The road sweeper is a special sanitation vehicle equipped with a sweeping brush and other cleaning systems. It is mainly used for sweeping operations in large and medium-sized urban sanitation departments. Road sweepers have greatly liberated the work intensity of sanitation workers, increased work efficiency, and reduced secondary pollution such as dust.

 

Specification for Road Sweeper truck:

Description				Specification
Automotive chassis	Model,categoryand manufacturer of chassis			DFL1160BX4
	Model and manufacturer of engine			CUMMINS 190HP
	Rated power of engine			141kW/2600r/min
	Tire		Front wheel	9.00R20 steel wire tire
			Rear wheel	9.00R20 steel wire tire
	Fuel type			Diesel meeting the discharge requirements in the fifth stage, select an appropriate diesel grade according to the temperature
Auxiliary engine	Standard configuration		Model and manufacturer	EQ6BT5.9 or QSB5.9-C160-30(Standard China)
			Power	118kw/2500r/min;120kw/2200r/min
	Clutch			Single plate, dry type and diaphragm spring
Fan	Type			Special high-pressure centrifugal fan
	Mode of transmission			Narrow V belt drive
Hydraulic system	Type			Open type, EHC and centralized control
	Main elements			Gear pump, gerotor motor, hydraulic cylinder, solenoid valve, integrated package, etc.
	Overflow pressure			14MPa
	Hydraulic oil capacity			60L
Electrical system	Control mode			PLC control + manual control, voice alarm, electromechanical liquid interlocking, etc.
	Chassis system voltage			24V
	Working device system voltage			12V
	Model of storage battery			Chassis: 12V-70A.H (2 pieces connected in parallel)
High-pressure cleaning system	High-pressure water pump		Type	Plunger type
			Model	Italian Pratissoli KEB36R
			Rated pressure	10MPa
			System working pressure	9MPa
			Rated flow	80L/min
			Rated speed	1150r/min
	Water valve and control		Type of water valve	High-pressure stainless steel ball valve, 10MPa
			Control mode	Oil cylinder drive, electrical control
	Type of nozzle of water spray rod			High-pressure washing type
Dust falling system of sweeping plate				Electric water pump and watering nozzle; water filter and water tank shared with the high-pressure cleaning system
Sweeping system		Type		Two vertical sweeping plates are symmetrically arranged between the front shaft and the rear shaft of the chassis and on both sides of the frame, which are driven by a hydraulic motor. The revolving speed of sweeping plate is adjustable. The left and right vertical sweepers can be independently lifted.
		Diameter of sweeper		Φ850mm
		Speed of sweeping plate		High gear (normal operation gear): 110r/min; intermediate gear: 80r/min; low gear: 60r/min
		Adjustment to dip angle of sweeping plate		Front inclination: 4°-6°; outward inclination: 2°-4°
Suction nozzle		Type		Double suction ports, built-in long spray lance with a high-pressure nozzle, the body of suction nozzle moves with the pavement. Lifting of the suction nozzle is controlled by the oil cylinder. A spring is used for floating suspension.
		Diameter of sucker		Φ180mm
		Ground clearance of suction nozzle during working		5~10mm
Left & right spray lance		Pendulum angle of spray lance		65°
		Nozzle ground clearance		340mm
		Total number of nozzles		8pcs

Special performance parameters	Garbage bin volume (m^3 )			7 (stainless steel material)
	Clean water tank volume (m^3 )			9 (stainless steel material)
	Sweeping width (mm)			2800-3200
	Sweeping operation speed (km/h)			3-15
	Cleaning operation speed (km/h)			15-20
	Maximum sweeping capacity (m^2/h)			48000
	Suction capacity	Density (g/cm^3)		2.0
		Weight (kg)		1.5
		Suction particle size (mm)		≥100
	Garbage bin dumping angle			≥45°
	Sweeping efficiency			≥96%
	Operating noise (db)			< 88 complies with GB7258 regulations
Driving performance parameters	Drive type			4×2 rear axle drive
	Suspension type			Leaf spring
	Number of leaf spring plates (front/rear)			8/10+7
	Braking system			Dual-circuit air brake, drum type
	Braking distance (fully loaded at 30 km/h)			≤10m
	Maximum speed (km/h)			99
	Minimum turning radius (m)			8
	Maximum climbing gradient			≥30%
	Clutch system			Single dry diaphragm spring clutch, hydraulic operation
	Transmission system			Mechanical 5-speed transmission with synchronizer, manual
	Engine fuel consumption			Driving (L/100 km)	Operation (L/h)	Operation (L/10,000 m^2)
				≤14	≤8	≤5
Dust suppression system	Spraying method			Low-pressure mist
	Main component composition			Imported high-pressure pump, water filter, pipelines, stainless steel spray frame, high-pressure nozzles, etc.
	High-pressure water pump			GTM
	Installation location		Sweeping dust suppression	Left and right front sweeping discs
			Vacuum dust suppression	Suction cup air inlet
	Control type			Electronic control, one-button operation

 

Hydraulic system	Type		Open type, electric control centralized operation
	Main components		Gear pump, cycloidal motor, hydraulic cylinder, solenoid valve, integrated block, high-pressure pump, etc.
	Cycloidal motor		Sanyo motor
	Gear oil pump		Changyuan Machinery
	Hydraulic oil cylinder		Haipulisi
	Hydraulic cylinder sealing elements		Dingji
	Hydraulic oil pipe		Tianhe
	Electromagnetic valve group		Haipulisi
	Shockproof pressure gauge		IMT
	Return oil filter		Sofima
	System overflow pressure	Mpa	10-12
	Hydraulic oil tank capacity	L	≥60
Electrical system	System composition		Composed of the chassis vehicle electrical circuit, auxiliary engine electrical components, and the operation control circuit of the specialized working devices.
	Chassis vehicle system voltage (V)		24
	Working device system voltage (V)		12
	Composition of the electric control box panel		Auxiliary engine tachometer, auxiliary engine water temperature gauge, engine oil temperature alarm device, various operation control switches
	Control switch		Shanghai
	Programmable Logic Controller		Baijiafu
	Circuit breaker		Haige
	Battery model		12V-70A.H (2 in parallel)
Fan system	Type		Special high-pressure centrifugal fan
	Brand		Changsha Lianyue
	Rated working speed	r/min	2700
	Transmission Type		Auxiliary engine, clutch, high-temperature resistant A belt drive (4 pieces)
	Fan Belt		Zhejiang Sanlisi
	Automatic Clutch		Centrifugal, imported material
	Air Volume (m^3/h)		5000 ~ 7800

 

Sweeping System	Type		Between the front and rear axles of the chassis, a liftable and extendable vertical sweeping disc is symmetrically arranged on both sides of the frame, with the disc rotation driven by a hydraulic motor, and the speed is adjustable.
	Main component composition		Sweeping disc bracket, sweeping disc, oil cylinder, oil pipe, connecting rod, adjusting rod, hydraulic motor, etc.
	Sweeping Brush Spread Diameter	mm	φ800-900
	Sweeping disc motor speed	r/min	140
	Number of sweeping discs		2
	Number of brushes per sweeping disc		22
	Sweeping disc tilt adjustment	Front sweeping disc	Forward tilt 5°~15°  External tilt 5°~10°
		Rear sweeping disc	Forward tilt 5°~10°  Internal tilt 5°~10°
Suction nozzle device	Type		The suction nozzle is suspended between the rear wheels of the chassis, consisting of the suction nozzle, roller, and suction pipe. The suction nozzle body can move with the surface, and the height of the suction nozzle is controlled by an oil cylinder for a dual-suction wide nozzle, which includes a long spray bar with high-pressure nozzles (8 nozzles in total). The suction nozzle body follows the road surface. The hydraulic drive is electrically controlled for automatic adjustment of the suction nozzle height, with a spring floating suspension.
	Suction nozzle diameter	mm	φ180
	Suction nozzle brand		NORRES
	Drive wheel bearing		SKF
	Wear-resistant outer ring of the drive wheel		Stellana
	Rigid part of the suction nozzle in working condition Ground clearance (mm)		5~8
	Wind speed of the suction nozzle (m/s)		50 ~ 65
	Negative pressure of the suction nozzle (mmH 2O)		380
Other configurations	Alarm system		Reversing voice alarm system
	Auxiliary operating system		The rear is equipped with an electric control operating system to control the lifting of the large compartment and the rear door switch, preventing safety accidents caused by the user operating in the cab without being able to observe the rear situation.
	Manual pump emergency lifting system		In the event of a failure of the auxiliary engine that renders the hydraulic system unusable, preventing the sweeping brush, suction cup, and large compartment from lifting, the manual pump emergency lifting system can be used for operation.

FAQ

Q1.You are a factory or trading Company?
Yes, we are the overseas sales department of the factory. And welcome to visit our factory.

Q2 . Could your company modify the standard product depending on my request? 
Yes. Our company is specialized in researching and designing various special-purpose vehicles and spare parts. We can provide
any product according to your demand.

Q3. Could your company totally customize products for me?
We can provide the customized-designing product meeting with any of your demands.

Q4. Could you provide the certification that we need?
We can provide various certifications associated with the truck.

Q5. How long could we receive our goods?
It depends on the product that you have ordered. If the goods are prepared, we will deliver your goods as soon as possible.