| Customization: | Available |
|---|---|
| After-sales Service: | Has |
| Warranty: | One Year or 30000km Which Comes First |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Outside dimensions | 11995×2550×3800mm |
| Maximum total mass | 42000kg |
| Carrier volume | Foam tank 3m3, Dry powder tank 2m3, water tank 16000kg; |
| Maximum speed | 95km/h |
| Fire pump rated flow | 60L/s 1.0MPa |
| Rated flow of fire monitor | Foam truck: 48L/s 1.0MPa Water tank truck: 60L/s 1.0MPa |
| Fire gun range | Foam truck: foam ≥50m water ≥55m water tank truck: ≥70m |
| Specific power | 248/19.25=12.88 |
| Approach / departure angle | 19°/12° |
| model | Giga |
| manufacturer | I-SUZU Truck Co., Ltd. |
| Engine rated power | 460hp |
| engine capacity | 10L |
| Engine emission standards | Eruo 5 |
| Drive form | 8×4 |
| Wheelbase | 1850+3280+1370mm |
| Maximum allowable gross weight | 19000kg |
| Minimum turning radius | ≤19m |
| Gearbox | Manual |
| PTO | Sandwich power take-off |
| structure | Flat head, four doors, original double row | |
| Number of passengers | 2+4 people | |
| Driver position | Left | |
| device | The dashboard of the original car is equipped with a fire control dashboard and a polic e light control box, equipped with 1. an alarm; 2. a power take-off control switch and indicator light; 3. an additional power switch; |
| General layout | The vehicle consists of two parts: the firefighter's cabin and the body. The body layout is a three-piece structure. The front part is the equipment box, the middle part is the water tank, and the rear part is the pump room. The tank body is a parallelepip |
| structure | The main frame structure is welded with high-quality square tubes, and the outer decorative plate is welded with carbon steel plates. The roof is non-slip and can be walked on. (Aluminum alloy square tube welding can be used according to user needs) |
|
| Equipment box | The equipment box is located at the rear of the passenger compartment, with aluminum alloy rolling doors on both sides and lighting lamps inside. Dry powder tank, nitrogen bottle and dry powder system are installed in the equipment box. | |
| Pump room | The pump room is located at the rear of the vehicle, with aluminum alloy rolling shutters on both sides and the back, with lights inside. Some common equipment can be placed on both sides of the pump room; suction pipes and fire ladder brackets are placed on the top of the car box. | |
| Insulation position: Install fuel heater (optional according to customer needs) | ||
|
Ladder and handle |
The rear ladder is made of aluminum alloy two-section flip ladder. It is used when it is not more than 350mm from the ground. The handle of the car is made of non-slip round steel pipe with a groove on the surface and the surface is sprayed with plastic. | |
| 2. Water tank | ||
| capacity | 16000L | |
| Material | High-quality carbon steel with a thickness of 5mm (can be made of stainless steel and PP according to user needs) | |
| Tank fixing | Flexible connection with chassis frame | |
| Tank settings | Manhole: One DN460 manhole, with quick lock/open device | |
| Overflow port: one DN65 overflow port | ||
| Remaining water outlet: set a DN40 water tank to discharge remaining water outlet, equipped with ball valve | ||
| Water injection port: connect a DN80 interface on the left and right sides of the water tank | ||
| Water inlet and outlet: one water tank to the water inlet pipe of the pump, DN150 valve, which can be controlled pneumatically and manually, one water pump to the water filling pipe of the tank, DN65 valve, which can be pneumatically and manually controlled | ||
| model | CB20.10/30.60 type medium and low pressure vehicle fire pump | |
| form | Medium and low pressure centrifugal | |
| Limited Data | 60L/s @1.0MPa 30L/s @2.0MPa | |
| Rated outlet pressure | 1.0MPa | |
| Maximum suction depth | 7m | |
| Water diversion device | Built-in sliding vane pump | |
| Diversion time | Maximum suction depth≤50s |
| Pipe material | High-quality seamless steel pipe | |
| Suction pipe | There is a DN150 suction port on the back side of the pump room | |
| Water injection line | There is a DN80 water injection port on the left and right sides of the water tank, and a DN65 water pump is installed in the pump room to inject water into the tank | |
| Outlet pipe | There are 2 DN65 and 1 DN80 water outlets on the left and right sides of the pump room, with shut-off valve and ampoule | |
| Cooling water pipeline | Cooling water pipeline and control valve with cooling power take-off |
| category | Item | Water tank fire truck | Qty |
remark
|
| Device name | ||||
|
Onboard technical documentation
|
1 | Fire engine instruction manual | 1 | |
| 2 | Fire engine equipment configuration table | 1 | ||
| 3 | Car chassis instruction manual | 1 | ||
| 4 | Automobile chassis certificate | 1 | ||
| 5 | Vehicle accessories (tools) | 1 | Original chassis accessories and tools | |
|
Fire extinguishing equipment
|
1 | Fire suction pipe | 4 | 2000mm×4 |
| 2 | Water filter | 1 | ||
| 3 | Water distributor | 1 | ||
| 4 | Water collector | 1 | ||
| 5 | ∈65×20m water belt | 2 | Atmospheric pressure | |
| 6 | ∈80×20m water belt | 2 | Atmospheric pressure | |
| 7 | Reducing joint | 2 | ||
| 8 | Homogeneous interface | 1 | ||
| 9 | Fire axe | 1 | ||
| 10 | Hose wrap | 4 | ||
| 11 | Apron bridge | 1 | ||
| 12 | Hose hook | 4 | ||
| 13 | Ground hydrant wrench | 1 | ||
| 14 | Underground hydrant wrench | 1 | ||
| 15 | Suction wrench | 2 | ||
| 16 | Fire nozzle | 2 | Dc switch blooms one each | |
| 17 | Fire bucket | 1 | ||
|
Break the life saver
|
1 | extinguisher | 1 | |
| 2 | Shovel | 1 | ||
| 3 | Fire axe | 1 | ||
| 4 | T-pick | 1 | ||
| 5 | Iron collar | 1 |
| Special function description |
| 1. Overall layout The whole vehicle is composed of two parts: the fireman crew room and the body. The body layout adopts the overall frame structure, the inner water tank, both sides are the equipment box, the rear is the water pump room, and the tank is the parallel rectangular box tank. 2. Equipment box and pump room The main frame structure of the structure is made of high quality square pipe welding, the outer decorative plate is welded with carbon steel plate, the roof is anti-skid, walking, the flip pedal is set on both sides, anti-skid design. Equipment box The equipment box is located in the back of the passenger room, with aluminum alloy rolling shutter doors on both sides and lights. Equipment box room shall set up a storage box according to the demand. Pump room The pump room is located in the rear of the vehicle, on both sides and behind, and there are lights inside. Some common equipment can be placed on both sides of the pump room 3. Climbing the ladder and get on the car The rear ladder is made of aluminum alloy, which is not more than 350mm from the ground. The surface is rounded steel pipe, and the surface is sprayed with plastic treatment. 4. Water tank Material of high quality carbon steel, thickness of 4mm (can be made of stainless steel and PP material according to user requirements) The tank body fixation is elastically attached to the chassis frame Manhole: 1 DN460 manhole with quick locking / opening device Overflow port: 1 DN65 overflow port Waste water outlet: 1 DN40 water tank, with ball valve Water injection port: 1 DN65 interface on the left and right side of the water tank Intake and outlet: 1 water tank to water pump inlet pipe, DN100 valve, pneumatic, manual control, 1 water pump to water tank filling pipe, DN50 valve, pneumatic and manual control 5. Foam tank Material of high quality carbon steel, thickness of 4mm (can be made of stainless steel and PP material according to user requirements) The tank body fixation is elastically attached to the chassis frame Manhole: 1 DN460 manhole, with quick locking / opening and automatic pressure relief device Overflow port: 1 DN40 overflow port Residual liquid port: 1 DN40 foam tank Foam outlet: set up 1 DN40 foam tank to the water pump outlet foam pipe 8. Pipe system Pipe material is made of high-quality seamless steel pipe A DN125 suction port is set on the rear side of the pump room One DN65 water injection outlet is set on the left and right sides of the water filling tank, and one DN40 pump is set in the pump room for water filling pipe into the tank One DN65 and one DN80 water outlet on the left and right sides of the pump room, with stop valve and cover cover The cooling water line is equipped with the cooling water line and the control valve for the cooling force collector 9. Fire control control system The control panel mainly includes two parts: cab control and pump room control Control control pump disgear, alarm, lighting and signal device control The pump room control is equipped with the main power switch, parameter display and status display 10. Electrical equipment Additional electrical equipment shall set up an independent circuit Auxiliary lighting firefighters room, water pump room and equipment box respectively equipped with lighting, control the instrument panel with lighting, indicator lights on both sides of the red and blue strobe, warning device long row all red lights, installed on the top of the cab, the alarm, the control box in front of the driver, fire lighting installation rear 35W fire searchlight 1 11. Equipment layout 1 According to the fire combat needs, according to the fire operation procedures, take and put nearby. 2 Use anti-corrosion, anti-vibration, anti-shedding, anti-scratch special fixture fixed. 3 Eye-catching signs, multiple people operation, non-interference with each other. |
| Q1: I want the front two tires are bias tires and the rear 9 tires are radial tires, is it ok ? |
| A: We can make the tires as your requirement to suit your country's need. |
| Q2: What about your products quality ? |
| A: Quality is our culture! "Our factory has advanced production technology and management team! We always attach great importance to quality controlling from the very beginning! |
| Q 3: Can i have samples of this type of flatbed semi trailer to test the quality ? |
| A: Yes, you can buy any samples to test the quality,our MOQ is 1 unit. |
| Q 4: What others we can do ? |
| A: According to your order, we will provide the best price and quality trucks and trailers. And we are well capable in offering overseas after-sales service. Besides, we also provide rational packing and shipping program,let shipment save money and security. |
| Q 5: How to guarantee customers get the goods smoothly after they pay ? |
| A: Don't worry, dear. We have been in this field for 10 years, we will send you production photos once in a while, and we will help you to book the latest ship. |
| Q 6: What's the delivery time ? |
| A: The delivery time is within 15 working days after receiving your advance payment. |
| Q 7: Can you supply some quick-wear truck or semi trailer parts ? |
| A: Yes, we can supply truck and semi trailer parts as your request,such as oil filter, fuel filter, air filter, traction, traction pin, balance beam and semi-trailer plate spring, hanging accessories, turntable, all kinds of trailer brake pads, brake pan, bearings etc. |
| Q 8: Do you have any used truck and semi trailer for sale ? |
| A: We have some trucks and trailers in stock for choice, from 2010-2016 year, the price are favorable. We'll show you our stock if you need. |
| Q 9: Which INCOTERMS 2010 TERMS can we work ? |
| MAOWO is a professional and sophisticated international player, can handle all INCOTERMS 2010 terms, and we normally work on FOB, CFR, CIF, CIP, EXW. |
| Q 10: What logistics ways we can work for shipment? |
| A: We can ship construction machinery by various transportation tools. (1) For 80% of our shipment, we will go by sea, to all main continents such as South America, Middle East, Africa, Oceania etc. Either by container or RoRo/Bulk shipment. (2) For neighborhood countries of China, such as Russia, Mongolia, Kazakhstan, Uzbekistan , Vietnam, Laos etc.,we can ship construction machinery by road or railway. (3) For light spare parts in urgent demand, we can ship it by international courier service, such as DHL, TNT, UPS, or Fedex. |
){kind=link}