High Pressure Jet Water Tank 4X2 Dongfeng 16 Tons Spray Road Sweeper Truck Street Cleaning Road Sweeping Factory Price for Sale

Product Description

Hubei Zhongbang Intelligent Automobile Co., Ltd. is an important branch of CLW Group, located in Suizhou City, Hubei Province, China. CLW Group is one of the largest manufacturers authorized by the Ministry of Industry and Information Technology of China to produce specialized trucks, and is a designated manufacturer and seller of specialized vehicles by the Chinese government. We specialize in producing and selling various road sweeper series. Suitable for street sweepers, power plants, steel mills, property management, residential areas, logistics parks, etc. (there are also various types of pure electric new energy sweepers); Suitable for places with large amounts of dust and dry ash (such as coal yards, mining areas, transfer yards, chemical fiber industrial parks, brick factories, etc.), dry and wet dual-use vacuum cleaners, deep cleaning vehicles, road pollution removal vehicles (there are also various new energy pure electric series). The car models can be selected from Dongfeng, Foton, Jiefang, Jianghuai, Jiangling, China National Heavy Duty Truck Group, Shaanxi Automobile and other full range models.
Our company's road sweepers have high work efficiency and are highly favored by both new and old customers. The company's trucks have been sold to over 80 overseas countries and regions including China, Asia, Africa, South America, and the Middle East, such as Russia, Kazakhstan, Nigeria, Chile, Malaysia, and Argentina.

Product Description

SWEEPING TRUCK

The new road cleaning model developed by our factory adopts the principle of negative pressure pure suction and one-way air intake (no back-blowing airflow), so that dust can only enter but not exit, no dust can be raised, and zero PM2.5 emissions can be achieved. It is suitable for mechanized cleaning operations of cement concrete pavements and asphalt pavements such as urban roads, viaducts, squares, airports, docks, and factory areas.
*The rear-mounted wide-width suction nozzle, suction cup with rolling sweep, and vertical filter cartridge structure are adopted.
*The wide-width suction nozzle is controlled to rise and fall by the hydraulic cylinder, and the hydraulic floating technology can greatly improve the service life of the rubber wheel.
*The unique box structure is adopted, and the filter cartridge is easy to disassemble and maintain. The garbage bin adopts an inclined plate structure, which is convenient for unloading without manual intervention. 

The circular filter cartridge is adopted, and an air pulse filter cartridge cleaning device is provided, which can effectively separate the dust on the filter cartridge of the vacuum cleaner, and avoid clogging and secondary pollution of the filter cartridge, thereby greatly improving the filter cartridge life and the overall performance of the vacuum cleaner, and greatly improving the filter cartridge cleaning effect; a large-capacity garbage bin is configured to improve operating efficiency.

[Main Technical Parameters]
Product Name	Sweeping Vehicle	Product Model	CLW5180TXSBX5 Sweeping Vehicle
Gross Weight (Kg)	18000	Tank Volume (m3)
Rated Load Capacity (Kg)	7500	Dimensions (mm)	8650×2500×3000
Curb Weight (Kg)	10305	Cargo Compartment Dimensions (mm)
Cab Seating Capacity (persons)	3	Load Utilization Coefficient
Approach Angle/Departure Angle (°)	20/13	Front Overhang/Rear Overhang (mm)	1430/2220
Number of Axles	2	Wheelbase (mm)	5000
Axle Load (Kg)	6000/10000	Maximum Speed (Km/h)	90
[Chassis Technical Parameters]
Chassis Model	DFL1160BX5	Chassis Name	Cargo Vehicle Chassis
Brand Name	Dongfeng	Manufacturer	Dongfeng Commercial Vehicle Co., Ltd.
Dimensions (mm)	8790×2370,2460×2760,2840	Number of Tires	6
Approach Angle/Departure Angle (°)	20/13	Tire Specifications	10.00-20
Number of Leaf Springs	8/10+8,7/9+6,9/10+8	Front Track (mm)	1880,1920
Fuel Type	Diesel	Rear Track (mm)	1860,1800
Emission Standards	Euro II, Euro III, Euro IV, Euro V
Engine Model	Engine Manufacturer	Displacement (ml)	Power (Kw)
B190 33	Dongfeng Cummins Engine Co., Ltd.	5900	140

1. Overview
The sweeping vehicle is produced using the Dongfeng Tianjin DFL1160BX5 type Class II vehicle chassis, modified with an auxiliary engine, fan, high-pressure water pump, clean water tank, waste bin, left and right side brushes, a wide suction nozzle with a spray rod, low-pressure washing system, dust suppression system, hydraulic system, dedicated device electrical control system, and auxiliary frame. The auxiliary engine drives the fan and high-pressure water pump, and the auxiliary engine uses a Dongfeng Cummins 170 horsepower diesel engine. The fan uses an 8.0 high-pressure centrifugal fan, which is highly efficient and has a large air volume, with a maximum air volume of up to 23,500 m ³/h. The high-pressure water pump adopts the internationally renowned T7012IR model plunger, with suitable flow rate and high pressure, allowing a maximum pressure of up to 10 MPa. The clean water tank makes full use of the onboard space, with a large volume of 9 m ³. The waste bin is made of single-layer stainless steel structure, designed for tipping and unloading, equipped with a high-pressure self-cleaning device. The self-cleaning device can assist in unloading when the waste bin is emptied, cleaning the interior of the waste bin. The left and right side brushes are designed as single sweep discs, reducing the number of brushes and brush wear, which can lower operating costs. The left and right side brushes can be controlled separately, allowing for different operational modes such as left sweep, right sweep, and full sweep. The width of the suction nozzle reaches 2418mm, ensuring an overall working width greater than 3.5m. Four height-adjustable suction nozzle wheels allow for easy adjustment and ensure a reasonable gap between the nozzle and the road surface. The interior of the suction nozzle features a spray rod, which maximizes the arrangement of high-pressure cleaning nozzles inside the nozzle, not only enhancing the cleaning effect but also minimizing secondary pollution caused by high-pressure water jets dislodging dirt. The left and right spray rods are installed on the suction nozzle and rise and fall with it. The structure is simple and compact, ensuring that the height of the spray rods from the ground remains fixed, achieving optimal cleaning results. The open hydraulic system drives the rise and fall of the left and right side brushes, the rotation of the left and right sweeping ribs, the rise and fall of the suction nozzle, the opening and closing of the waste bin's rear door, and the tipping and resetting of the waste bin. The side power take-off of the chassis transmission drives the low-pressure water pump, enabling the watering vehicle's low-pressure washing function. It features one-button operation for starting and stopping.
The sweeping vehicle has multiple functions including surface cleaning, surface sweeping, curbstone cleaning, washing of curbstones and curbstone faces, low-pressure washing, and spray dust suppression. There are six operational modes available: 'Full Wash and Sweep', 'Left Wash and Sweep', 'Right Wash and Sweep', 'Full Sweep', 'Left Sweep', and 'Right Sweep'. Selecting the 'Full Wash and Sweep' mode for cleaning squares and road surfaces provides high efficiency and excellent results, achieving a cleanliness rate of over 90%. Choosing the 'Left Wash and Sweep' or 'Right Wash and Sweep' mode allows for cleaning road surfaces and curbstones, as well as scrubbing the vertical surfaces of curbstones. When road surface sweeping or maintenance is required, the sweeping mode can be selected. When dust suppression is needed, the spraying device can be activated to perform dust suppression operations. It can also conduct low-pressure washing operations on the road surface, similar to a watering vehicle.
The sweeping vehicle is suitable for cleaning operations on urban roads, highways, squares, airports, docks, tunnels, bridges, isolation walls, curbstones, and the mechanical cleaning, sweeping, and dust suppression of curbstone surfaces.


Table 1: Vehicle Performance and Structural Parameters

Item					Unit
Operation Work Performance Capability	Washing Sweeping Operation Work	Maximum sweeping width (including curbstone cleaning width)			m	3.5
		Pavement sweeping width (excluding curbstone cleaning width)			m	3.5
		Sweeping speed			Km/h	3∽10
		Rated pressure of cleaning water			MPa	10
		Rated flow rate of cleaning water			L/min	122
	Cleaning Sweeping Operation Work	Sweeping width			m	3.5
		Sweeping speed			Km/h	3∽15
		Cleaning Speed			Km/h	3∽20
		Maximum Sweeping Capacity			M^2/h	70000
		Discharge Angle			°	≥48
	Low-Pressure Washing Width				m	24
Total Capacity of Clean Water Tank					L	9000
Total Capacity of Waste Bin					L	7000
Driving Performance	Maximum Speed (Fully Loaded)				km/h	90
	Maximum Climbing Angle				°	30
	Braking Distance (Fully Loaded at 30 Km/h)				m	≤10
	Minimum Turning Diameter				m	19
Fuel Consumption	Fuel Consumption per 100 Kilometers under Specified Conditions				L/100km	18
	Full Washing and Sweeping Operation Operating Speed 7km/h (2nd Gear Idle)			Auxiliary Engine Speed 2000 r/min	L/h	13.7
					L/10000m^2	5.64
				Auxiliary Engine Speed 1700 r/min	L/h	8.9
					L/10000m^2	3.76
	Full sweeping operation Operating Speed 7km/h (2nd Gear Idle)			Auxiliary engine speed 2000 r/min	L/h	11.1
					L/10000m^2	4.59
				Auxiliary engine speed 1700 r/min	L/h	7.2
					L/10000m^2	3.12
Quality parameters	Curb weight of the vehicle				Kg	11650
	Maximum gross weight				kg	16000
Structural dimensions	Dimensions (Length x Width x Height)				mm	8350X2500X3000
	Wheelbase				mm	5000
	Track width		Front wheel		mm
			Rear wheel		mm
	Approach angle				°
	Departure angle				°	17.5
	Minimum ground clearance				mm	275

Table 2 Component types and parameters

Item
Gas Vehicle Chassis Plate	Chassis model, category, manufacturer		Dongfeng DFL1160BX5	Dongfeng DFL1160BX5
	Engine model, manufacturer		Dongfeng Cummins	B190 33
	Engine rated power		132kw/2500r/min
	Transmission model		DF6S900
	Transmission gear ratio		1:6.938/2:3.996/3:2.320/4:1.493/5:1.000/6:0.814/R:6.188
	Drive axle		Single-stage double-curve gear main reducer Gear ratio i=5.143	Single-stage double-curve gear main reducer Gear ratio i=5.571
	Tires	Front wheel	9.00-20(9.00R20)
		Rear wheel	9.00-20(9.00R20)
	Fuel type		Diesel that meets the fourth stage emission requirements, select the appropriate diesel grade based on temperature
Vice Send Movement Machine	Standard Configuration	Model, Manufacturer	Dongfeng Cummins Engine Co., Ltd.
		Power	125
	Clutch		Automotive clutch, pneumatic drive, Electrical Automatic Control
	Radiator
Wind Machine	Type		Special high-pressure centrifugal fan   Model No7.1#C, maximum air volume 23500M^3/h
	Rated Speed		2400r/min
	Transmission Type		Narrow V-Belt Drive (Model 15N-2690, 5 belts)
Liquid Pressure System System	Type		Open type, electro-hydraulic control centralized operation
	Overflow pressure		15MPa
	Hydraulic oil capacity		60L
Electric Air System System	Control method		PLC control + manual control, electromechanical hydraulic interlock, etc.
	Chassis system voltage		24V
	Working device system voltage		24V
	Battery model		12V-140A.H (2 in series)
High Pressure Cleaning Washing System System	High-pressure water pump	Type	Plunger pump
		Model	T7012IR
		Rated pressure	10MPa
		System operating pressure	10MPa
		Rated flow rate	122L/min
		Rated Speed	1000r/min
		Transmission Type	Narrow V-Belt Drive (Model 15N-1900, 3 units)
	Water Valve and Control	Water Valve Type	High-Pressure Stainless Steel Ball Valve, 10MPa
		Control method	Cylinder Driven, Electrical Control
	Spray Rod Nozzle Type		High-Pressure Washing Type

Continuation Table 1: Main Component Types and Parameters

Item
Low-Pressure Washing System	Low-Pressure Water Pump	Model	DH140
		Flow Rate	60m^3/h
		Lift Height	90m
	Washing Width		24m
Dust Suppression System with Sweeping Disk			Electric Water Pump, Spraying Nozzle. Shared water filter, water tank, etc. with high-pressure cleaning system
Cleaning Sweeping System System	Type		Between the front and rear axles of the chassis, a liftable and extendable vertical sweeping disk is symmetrically arranged on both sides of the frame, driven by a hydraulic motor with adjustable rotation speed.
	Brush Diameter		φ900mm
	Brush Disc Speed		600 revolutions per minute
	Brush Disc Tilt Adjustment		Forward tilt: 4°-6°; outward tilt: 2°-4°
Suction Nozzle	Type		Dual suction wide nozzle, equipped with a long spray bar that includes high-pressure nozzles (13 nozzles in total), with the nozzle body following the road surface. Hydraulic drive with electrical automatic control for nozzle lift and spring floating suspension.
	Suction Pipe Diameter		2Xφ180mm, two pieces.
	Ground Clearance of Rigid Parts During Operation		5-10mm
Left and Right Spray Bars	Spray Bar Swing		Cylinder driven, electrical automatic control, swing angle 78°
	Height of the spray rod from the ground		The suction nozzle follows the movement of the suction nozzle wheel with a ground clearance of 280mm
	Total number of nozzles		8 units, 4 on each side

Detailed Photos

HIGH EFFICIENCY

The circular filter cartridge is adopted and equipped with an air pulse filter cartridge cleaning device, which can effectively separate the dust on the filter cartridge of the vacuum cleaner and avoid clogging and secondary pollution of the filter cartridge, thereby greatly improving the service life of the filter cartridge and the overall performance of the vacuum cleaner, and greatly improving the filter cartridge cleaning effect; a large-capacity garbage bin is configured to improve operating efficiency.

EASY TO OPERATE

The electrical system adopts integrated modular control, and the panel has video functions such as fault diagnosis, digital testing, real-time display and monitoring of auxiliary engine speed, water temperature, operating conditions, etc. The operating status is clear at a glance and maintenance is convenient.

SEALING EFFECT

The hydraulic pipeline adopts the German standard technology sealing structure, which has good vibration resistance, high sealing reliability and can achieve a leak-free sealing effect.

LONG SERVICE LIFE

Hydraulic solenoid valves are used, and key electronic control components use electrical switches, which have high reliability and long service life.

FAQ

Q1.You are a factory or trading Company?
Yes, we are the overseas sales department of the factory. And welcome to visit our factory.

Q2 . Could your company modify the standard product depending on my request? 
Yes. Our company is specialized in researching and designing various special-purpose vehicles and spare parts. We can provide
any product according to your demand.

Q3. Could your company totally customize products for me?
We can provide the customized-designing product meeting with any of your demands.

Q4. Could you provide the certification that we need?
We can provide various certifications associated with the truck.

Q5. How long could we receive our goods?
It depends on the product that you have ordered. If the goods are prepared, we will deliver your goods as soon as possible.