Hubei Zhongbang Intelligent Automobile Co., Ltd. is an important branch of CLW Group, located in Suizhou City, Hubei Province, China. CLW Group is one of the largest manufacturers authorized by the Ministry of Industry and Information Technology of China to produce specialized trucks, and is a designated manufacturer and seller of specialized vehicles by the Chinese government. We specialize in producing and selling various road sweeper series. Suitable for street sweepers, power plants, steel mills, property management, residential areas, logistics parks, etc. (there are also various types of pure electric new energy sweepers); Suitable for places with large amounts of dust and dry ash (such as coal yards, mining areas, transfer yards, chemical fiber industrial parks, brick factories, etc.), dry and wet dual-use vacuum cleaners, deep cleaning vehicles, road pollution removal vehicles (there are also various new energy pure electric series). The car models can be selected from Dongfeng, Foton, Jiefang, Jianghuai, Jiangling, China National Heavy Duty Truck Group, Shaanxi Automobile and other full range models.
Our company's road sweepers have high work efficiency and are highly favored by both new and old customers. The company's trucks have been sold to over 80 overseas countries and regions including China, Asia, Africa, South America, and the Middle East, such as Russia, Kazakhstan, Nigeria, Chile, Malaysia, and Argentina.
SWEEPING TRUCK
Road sweeper is a new generation of sweeping and suction combined road cleaning vehicles developed by our company combined with domestic and foreign advanced technology, integrating road cleaning, garbage recycling and transportation as one of the new and efficient cleaning equipment. Mainly suitable for city streets, municipal squares, large factories and mines mechanized cleaning and cleaning operation, high vehicle operation efficiency, advanced and reliable technical performance, beautiful shape.
Efficient and stable, and design humanity:
Super dust gathering technology: optimize the internal gas flow and structural design of the nozzle, and improve the suction capacity by 10%. The design of "middle four sweep plate + rear suction mouth", in the process of vehicle driving, automatically rotate inward to gather the garbage to the middle of the vehicle, to facilitate the tail of the bus to absorb all the garbage into the car at one time, and improve the overall cleaning rate.
Pipe stabilization technology: The hydraulic valve set, CNC cold bending precision seamless steel pipe, hydraulic pipe adopts international advanced card sleeve type joint, to ensure the stability and fluency of the hydraulic action of the vehicle, greatly reduce the failure rate of the hydraulic system.
Humanized design: super wide back door, more than 85 degrees of opening Angle, the dustbin tipping Angle is greater than 40 degrees, easier to dump garbage, clean up the dustbin.
Science and technology environmental protection:
Fan noise reduction technology: through simulation analysis, optimize the fan blade, design the low-noise fan. Power matching technology: optimize the engine and working conditions matching, use the secondary engine special drive fan and hydraulic system, to ensure that it can continue to work during driving. The transmission between the secondary engine and the fan is equipped with an automatic clutch, which can ensure the automatic separation from the secondary engine during no-load start and stop, and improve the service life of the secondary engine.
Easy to operate, highly efficient and durable:
ully electric driving control, the instrument on the electric control box displays operation parameters, fault information, etc. Video monitoring function, so that the operation state at a glance, easy for the driver to operate and maintain.
Adaptive technology of the cleaning mechanism: the cleaning mechanism can automatically avoid obstacles, with the protection function and reset function, shrink after encountering the obstacle, and reset after crossing the obstacle. Improve the operation cleaning rate, and effectively extend the service life of more than 15%.
| Vehicle name |
sweeper cleaning car |
model number |
ZB5183SLEQ3 |
| gross mass |
18000kg |
curb weight(Kg) |
11100kg |
| Rated quality |
7705kg |
wheel base |
5100mm |
| Waterbox volume |
4m³ |
Dumpster volume |
8m³ |
| Tyre model |
10.00R20 18PR |
Clean the width(mm) |
3000-3500 |
| Emission standards |
Euro II Euro III Euro IV Euro V |
| Vehicle size |
9045*2530*3250mm |
| engine |
horsepower(ps) |
220HP |
| displacement(ml) |
6580 |
| The secondary engine |
model number |
yuchai140 |
| power(kw) |
125 |
horsepower(ps) |
170 |
| displacement(ml) |
5900 |
Special performance parameters |
Garbage bin volume (m 3 ) |
7 (stainless steel material) |
| Clean water tank volume (m 3 ) |
9 (stainless steel material) |
| Sweeping width (mm) |
2800-3200 |
| Sweeping operation speed (km/h) |
3-15 |
| Cleaning operation speed (km/h) |
15-20 |
| Maximum sweeping capacity (m 2/h) |
48000 |
| Suction capacity |
Density (g/cm 3) |
2.0 |
| Weight (kg) |
1.5 |
| Suction particle size (mm) |
≥100 |
| Garbage bin dumping angle |
≥45° |
| Sweeping efficiency |
≥96% |
| Operating noise (db) |
< 88 complies with GB7258 regulations |
| Driving performance parameters |
Drive type |
4×2 rear axle drive |
| Suspension type |
Leaf spring |
| Number of leaf spring plates (front/rear) |
8/10+7 |
| Braking system |
Dual-circuit air brake, drum type |
| Braking distance (fully loaded at 30 km/h) |
≤10m |
| Maximum speed (km/h) |
99 |
| Minimum turning radius (m) |
8 |
| Maximum climbing gradient |
≥30% |
| Clutch system |
Single dry diaphragm spring clutch, hydraulic operation |
| Transmission system |
Mechanical 5-speed transmission with synchronizer, manual |
| Engine fuel consumption |
Driving (L/100 km) |
Operation (L/h) |
Operation (L/10,000 m 2) |
| ≤14 |
≤8 |
≤5 |
| Dust suppression system |
Spraying method |
Low-pressure mist |
| Main component composition |
Imported high-pressure pump, water filter, pipelines, stainless steel spray frame, high-pressure nozzles, etc. |
| High-pressure water pump |
GTM |
| Installation location |
Sweeping dust suppression |
Left and right front sweeping discs |
| Vacuum dust suppression |
Suction cup air inlet |
| Control type |
Electronic control, one-button operation |
| Hydraulic system |
Type |
Open type, electric control centralized operation |
| Main components |
Gear pump, cycloidal motor, hydraulic cylinder, solenoid valve, integrated block, high-pressure pump, etc. |
| Cycloidal motor |
Sanyo motor |
| Gear oil pump |
Changyuan Machinery |
| Hydraulic oil cylinder |
Haipulisi |
| Hydraulic cylinder sealing elements |
Dingji |
| Hydraulic oil pipe |
Tianhe |
| Electromagnetic valve group |
Haipulisi |
| Shockproof pressure gauge |
IMT |
| Return oil filter |
Sofima |
| System overflow pressure |
Mpa |
10-12 |
| Hydraulic oil tank capacity |
L |
≥60 |
| Electrical system |
System composition |
Composed of the chassis vehicle electrical circuit, auxiliary engine electrical components, and the operation control circuit of the specialized working devices. |
| Chassis vehicle system voltage (V) |
24 |
| Working device system voltage (V) |
12 |
| Composition of the electric control box panel |
Auxiliary engine tachometer, auxiliary engine water temperature gauge, engine oil temperature alarm device, various operation control switches |
| Control switch |
Shanghai |
| Programmable Logic Controller |
Baijiafu |
| Circuit breaker |
Haige |
| Battery model |
12V-70A.H (2 in parallel) |
| Fan system |
Type |
Special high-pressure centrifugal fan |
| Brand |
Changsha Lianyue |
| Rated working speed |
r/min |
2700 |
| Transmission Type |
Auxiliary engine, clutch, high-temperature resistant A belt drive (4 pieces) |
| Fan Belt |
Zhejiang Sanlisi |
| Automatic Clutch |
Centrifugal, imported material |
| Air Volume (m 3/h) |
5000 ~ 7800 |
| Sweeping System |
Type |
Between the front and rear axles of the chassis, a liftable and extendable vertical sweeping disc is symmetrically arranged on both sides of the frame, with the disc rotation driven by a hydraulic motor, and the speed is adjustable. |
| Main component composition |
Sweeping disc bracket, sweeping disc, oil cylinder, oil pipe, connecting rod, adjusting rod, hydraulic motor, etc. |
| Sweeping Brush Spread Diameter |
mm |
φ800-900 |
| Sweeping disc motor speed |
r/min |
140 |
| Number of sweeping discs |
2 |
| Number of brushes per sweeping disc |
22 |
| Sweeping disc tilt adjustment |
Front sweeping disc |
Forward tilt 5°~15° External tilt 5°~10° |
| Rear sweeping disc |
Forward tilt 5°~10° Internal tilt 5°~10° |
| Suction nozzle device |
Type |
The suction nozzle is suspended between the rear wheels of the chassis, consisting of the suction nozzle, roller, and suction pipe. The suction nozzle body can move with the surface, and the height of the suction nozzle is controlled by an oil cylinder for a dual-suction wide nozzle, which includes a long spray bar with high-pressure nozzles (8 nozzles in total). The suction nozzle body follows the road surface. The hydraulic drive is electrically controlled for automatic adjustment of the suction nozzle height, with a spring floating suspension. |
| Suction nozzle diameter |
mm |
φ180 |
| Suction nozzle brand |
NORRES |
| Drive wheel bearing |
SKF |
| Wear-resistant outer ring of the drive wheel |
Stellana |
Rigid part of the suction nozzle in working condition
Ground clearance (mm) |
5~8 |
| Wind speed of the suction nozzle (m/s) |
50 ~ 65 |
| Negative pressure of the suction nozzle (mmH 2O) |
380 |
| Other configurations |
Alarm system |
Reversing voice alarm system |
| Auxiliary operating system |
The rear is equipped with an electric control operating system to control the lifting of the large compartment and the rear door switch, preventing safety accidents caused by the user operating in the cab without being able to observe the rear situation. |
| Manual pump emergency lifting system |
In the event of a failure of the auxiliary engine that renders the hydraulic system unusable, preventing the sweeping brush, suction cup, and large compartment from lifting, the manual pump emergency lifting system can be used for operation. |
Q1.You are a factory or trading Company?
Yes, we are the overseas sales department of the factory. And welcome to visit our factory.
Q2 . Could your company modify the standard product depending on my request?
Yes. Our company is specialized in researching and designing various special-purpose vehicles and spare parts. We can provide
any product according to your demand.
Q3. Could your company totally customize products for me?
We can provide the customized-designing product meeting with any of your demands.
Q4. Could you provide the certification that we need?
We can provide various certifications associated with the truck.
Q5. How long could we receive our goods?
It depends on the product that you have ordered. If the goods are prepared, we will deliver your goods as soon as possible.
){kind=link}