| Customization: | Available |
|---|---|
| After-sales Service: | 12 Months |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Hubei Zhongbang Intelligent Automobile Co., Ltd. is an important branch of CLW Group, located in Suizhou City, Hubei Province, China. CLW Group is one of the largest manufacturers authorized by the Ministry of Industry and Information Technology of China to produce specialized trucks, and is a designated manufacturer and seller of specialized vehicles by the Chinese government. We specialize in producing and selling various road sweeper series. Suitable for street sweepers, power plants, steel mills, property management, residential areas, logistics parks, etc. (there are also various types of pure electric new energy sweepers); Suitable for places with large amounts of dust and dry ash (such as coal yards, mining areas, transfer yards, chemical fiber industrial parks, brick factories, etc.), dry and wet dual-use vacuum cleaners, deep cleaning vehicles, road pollution removal vehicles (there are also various new energy pure electric series). The car models can be selected from Dongfeng, Foton, Jiefang, Jianghuai, Jiangling, China National Heavy Duty Truck Group, Shaanxi Automobile and other full range models.
Dongfeng Tianjin 4X2 8Tons Road Spraying Washing Sweeper Truck
Features
1. Four sweeper brush and sucker for sweeping combination with excellent sweeping ability
2. each side of the broom or brush can work at the same time, or work independently on each side
3. cleaning device mechanism is simple and reliable, which is hard to damage;
4. all stainless steel dust bins, water tanks,
5. hydraulic system core components are all imported;
6. cleaning system powered by auxiliary engine, which do not interfere with vehicle power.
Road Sweeper (sweeper truck) is one of the sanitation equipments. It is a new type of high-efficiency sweeping equipment integrating road sweeping, garbage recycling and transportation. It can be widely used in road highways, municipal and airport roads, urban residential areas, parks and other roads. Pavement sweepers not only clean trash, but also dust and purify the air medium on the road, which not only ensures the beauty of the road, maintains the sanitation of the environment, but also maintains the good working conditions of the road surface, and reduces and prevents traffic accidents. The occurrence and further extend the life of the road. It has become a trend to use pavement sweepers for road maintenance in China.
The road sweeper is a special sanitation vehicle equipped with a sweeping brush and other cleaning systems. It is mainly used for sweeping operations in large and medium-sized urban sanitation departments. Road sweepers have greatly liberated the work intensity of sanitation workers, increased work efficiency, and reduced secondary pollution such as dust.
Specification for Road Sweeper truck:
| Description | Specification | |||
| Automotive chassis | Model,categoryand manufacturer of chassis | DFL1160BX4 | ||
| Model and manufacturer of engine | CUMMINS 190HP | |||
| Rated power of engine | 141kW/2600r/min | |||
| Tire | Front wheel | 9.00R20 steel wire tire | ||
| Rear wheel | 9.00R20 steel wire tire | |||
| Fuel type |
Diesel meeting the discharge requirements in the fifth stage, select an appropriate diesel grade according to the temperature |
|||
| Auxiliary engine | Standard configuration | Model and manufacturer |
EQ6BT5.9 or QSB5.9-C160-30(Standard China) |
|
| Power | 118kw/2500r/min;120kw/2200r/min | |||
| Clutch | Single plate, dry type and diaphragm spring | |||
| Fan | Type | Special high-pressure centrifugal fan | ||
| Mode of transmission | Narrow V belt drive | |||
| Hydraulic system | Type | Open type, EHC and centralized control | ||
| Main elements | Gear pump, gerotor motor, hydraulic cylinder, solenoid valve, integrated package, etc. | |||
| Overflow pressure | 14MPa | |||
| Hydraulic oil capacity | 60L | |||
| Electrical system | Control mode | PLC control + manual control, voice alarm, electromechanical liquid interlocking, etc. | ||
| Chassis system voltage | 24V | |||
| Working device system voltage | 12V | |||
| Model of storage battery | Chassis: 12V-70A.H (2 pieces connected in parallel) | |||
| High-pressure cleaning system | High-pressure water pump | Type | Plunger type | |
| Model | Italian Pratissoli KEB36R | |||
| Rated pressure | 10MPa | |||
| System working pressure | 9MPa | |||
| Rated flow | 80L/min | |||
| Rated speed | 1150r/min | |||
| Water valve and control | Type of water valve | High-pressure stainless steel ball valve, 10MPa | ||
| Control mode | Oil cylinder drive, electrical control | |||
| Type of nozzle of water spray rod | High-pressure washing type | |||
| Dust falling system of sweeping plate | Electric water pump and watering nozzle; water filter and water tank shared with the high-pressure cleaning system | |||
Sweeping system |
Type | Two vertical sweeping plates are symmetrically arranged between the front shaft and the rear shaft of the chassis and on both sides of the frame, which are driven by a hydraulic motor. The revolving speed of sweeping plate is adjustable. The left and right vertical sweepers can be independently lifted. | ||
| Diameter of sweeper | Φ850mm | |||
| Speed of sweeping plate | High gear (normal operation gear): 110r/min; intermediate gear: 80r/min; low gear: 60r/min | |||
| Adjustment to dip angle of sweeping plate | Front inclination: 4°-6°; outward inclination: 2°-4° | |||
| Suction nozzle | Type | Double suction ports, built-in long spray lance with a high-pressure nozzle, the body of suction nozzle moves with the pavement. Lifting of the suction nozzle is controlled by the oil cylinder. A spring is used for floating suspension. | ||
| Diameter of sucker | Φ180mm | |||
| Ground clearance of suction nozzle during working | 5~10mm | |||
| Left & right spray lance | Pendulum angle of spray lance | 65° | ||
| Nozzle ground clearance | 340mm | |||
| Total number of nozzles | 8pcs | |||
Special performance parameters |
Garbage bin volume (m 3 ) | 7 (stainless steel material) | ||||
| Clean water tank volume (m 3 ) | 9 (stainless steel material) | |||||
| Sweeping width (mm) | 2800-3200 | |||||
| Sweeping operation speed (km/h) | 3-15 | |||||
| Cleaning operation speed (km/h) | 15-20 | |||||
| Maximum sweeping capacity (m 2/h) | 48000 | |||||
| Suction capacity | Density (g/cm 3) | 2.0 | ||||
| Weight (kg) | 1.5 | |||||
| Suction particle size (mm) | ≥100 | |||||
| Garbage bin dumping angle | ≥45° | |||||
| Sweeping efficiency | ≥96% | |||||
| Operating noise (db) | < 88 complies with GB7258 regulations | |||||
| Driving performance parameters | Drive type | 4×2 rear axle drive | ||||
| Suspension type | Leaf spring | |||||
| Number of leaf spring plates (front/rear) | 8/10+7 | |||||
| Braking system | Dual-circuit air brake, drum type | |||||
| Braking distance (fully loaded at 30 km/h) | ≤10m | |||||
| Maximum speed (km/h) | 99 | |||||
| Minimum turning radius (m) | 8 | |||||
| Maximum climbing gradient | ≥30% | |||||
| Clutch system | Single dry diaphragm spring clutch, hydraulic operation | |||||
| Transmission system | Mechanical 5-speed transmission with synchronizer, manual | |||||
| Engine fuel consumption | Driving (L/100 km) | Operation (L/h) | Operation (L/10,000 m 2) | |||
| ≤14 | ≤8 | ≤5 | ||||
| Dust suppression system | Spraying method | Low-pressure mist | ||||
| Main component composition | Imported high-pressure pump, water filter, pipelines, stainless steel spray frame, high-pressure nozzles, etc. | |||||
| High-pressure water pump | GTM | |||||
| Installation location | Sweeping dust suppression | Left and right front sweeping discs | ||||
| Vacuum dust suppression | Suction cup air inlet | |||||
| Control type | Electronic control, one-button operation | |||||
| Hydraulic system | Type | Open type, electric control centralized operation | |
| Main components | Gear pump, cycloidal motor, hydraulic cylinder, solenoid valve, integrated block, high-pressure pump, etc. | ||
| Cycloidal motor | Sanyo motor | ||
| Gear oil pump | Changyuan Machinery | ||
| Hydraulic oil cylinder | Haipulisi | ||
| Hydraulic cylinder sealing elements | Dingji | ||
| Hydraulic oil pipe | Tianhe | ||
| Electromagnetic valve group | Haipulisi | ||
| Shockproof pressure gauge | IMT | ||
| Return oil filter | Sofima | ||
| System overflow pressure | Mpa | 10-12 | |
| Hydraulic oil tank capacity | L | ≥60 | |
| Electrical system | System composition | Composed of the chassis vehicle electrical circuit, auxiliary engine electrical components, and the operation control circuit of the specialized working devices. | |
| Chassis vehicle system voltage (V) | 24 | ||
| Working device system voltage (V) | 12 | ||
| Composition of the electric control box panel | Auxiliary engine tachometer, auxiliary engine water temperature gauge, engine oil temperature alarm device, various operation control switches | ||
| Control switch | Shanghai | ||
| Programmable Logic Controller | Baijiafu | ||
| Circuit breaker | Haige | ||
| Battery model | 12V-70A.H (2 in parallel) | ||
| Fan system | Type | Special high-pressure centrifugal fan | |
| Brand | Changsha Lianyue | ||
| Rated working speed | r/min | 2700 | |
| Transmission Type | Auxiliary engine, clutch, high-temperature resistant A belt drive (4 pieces) | ||
| Fan Belt | Zhejiang Sanlisi | ||
| Automatic Clutch | Centrifugal, imported material | ||
| Air Volume (m 3/h) | 5000 ~ 7800 | ||
| Sweeping System | Type | Between the front and rear axles of the chassis, a liftable and extendable vertical sweeping disc is symmetrically arranged on both sides of the frame, with the disc rotation driven by a hydraulic motor, and the speed is adjustable. | |
| Main component composition | Sweeping disc bracket, sweeping disc, oil cylinder, oil pipe, connecting rod, adjusting rod, hydraulic motor, etc. | ||
| Sweeping Brush Spread Diameter | mm | φ800-900 | |
| Sweeping disc motor speed | r/min | 140 | |
| Number of sweeping discs | 2 | ||
| Number of brushes per sweeping disc | 22 | ||
| Sweeping disc tilt adjustment | Front sweeping disc | Forward tilt 5°~15° External tilt 5°~10° | |
| Rear sweeping disc | Forward tilt 5°~10° Internal tilt 5°~10° | ||
| Suction nozzle device | Type | The suction nozzle is suspended between the rear wheels of the chassis, consisting of the suction nozzle, roller, and suction pipe. The suction nozzle body can move with the surface, and the height of the suction nozzle is controlled by an oil cylinder for a dual-suction wide nozzle, which includes a long spray bar with high-pressure nozzles (8 nozzles in total). The suction nozzle body follows the road surface. The hydraulic drive is electrically controlled for automatic adjustment of the suction nozzle height, with a spring floating suspension. | |
| Suction nozzle diameter | mm | φ180 | |
| Suction nozzle brand | NORRES | ||
| Drive wheel bearing | SKF | ||
| Wear-resistant outer ring of the drive wheel | Stellana | ||
| Rigid part of the suction nozzle in working condition Ground clearance (mm) |
5~8 | ||
| Wind speed of the suction nozzle (m/s) | 50 ~ 65 | ||
| Negative pressure of the suction nozzle (mmH 2O) | 380 | ||
| Other configurations | Alarm system | Reversing voice alarm system | |
| Auxiliary operating system | The rear is equipped with an electric control operating system to control the lifting of the large compartment and the rear door switch, preventing safety accidents caused by the user operating in the cab without being able to observe the rear situation. | ||
| Manual pump emergency lifting system | In the event of a failure of the auxiliary engine that renders the hydraulic system unusable, preventing the sweeping brush, suction cup, and large compartment from lifting, the manual pump emergency lifting system can be used for operation. | ||
Q1.You are a factory or trading Company?
){kind=link}