| Customization: | Available |
|---|---|
| After-sales Service: | 12 Months |
| Warranty: | 12 Months |
Suppliers with verified business licenses
|
item
|
value
|
|
Transmission Type
|
Manual
|
|
Condition
|
New
|
|
Emission Standard
|
Euro 3
|
|
Fuel Type
|
Diesel
|
|
Dimensions (L x W x H) (mm)
|
5980*2000*3100
|
|
Place of Origin
|
China
|
|
|
Hubei
|
|
Brand Name
|
Dong Feng
|
|
After-sales Service Provided
|
Video technical support
|
|
Horsepower
|
< 150hp
|
|
Engine Capacity
|
< 4L
|
|
Fuel Tank Capacity
|
100-200L
|
|
Product name
|
Aerial Manlift Work Platform Truck
|
|
Description
|
Vehicle Platform Truck
|
|
Max working height
|
14m
|
|
Control system
|
Hydraulic Control Aerial Platform Truck
|
|
Type
|
Folding arm high altitude platform car
|
|
Keywords
|
Aerial Ladder Platform Truck
|
|
Truck type
|
Lift Bucket Truck
|
|
Drive type
|
Rear wheel drive
|
|
Chassis brand
|
DongFeng.FAW.Foton.Sino.JAC.IVEC O.Shacman
|
|
Working height
|
8m/13m/14m/16m/18m/22m/24m
|
| Basic configuration for installation - Arm frame | |||||
| Arm frame form: | Three section folding arm | Arm section: | quadrilateral | ||
| Arm frame material: | Profile Q345B/4mm | Variable amplitude: | Single cylinder variable amplitude | ||
| Fluctuation angle: | 0 ° -70 ° (relative to the horizontal plane) | ||||
| Basic Configuration for Installation - Operating Conditions | |||||
| Homework height: | 13.3 meters | Range of homework at height: | 2.6 meters | ||
| Assignment range: | 5.9 meters | Height of homework during amplitude: | 8 meters | ||
| Rotation angle: | Bidirectional 360 ° continuous rotation | ||||
| Basic configuration for installation - lifting performance | |||||
| Lifting quality: | 900kg | Telescopic crane arm: | Elongation of 1 meter | ||
| a wire rope: | 8 out of 40m | Lifting height: | 7.3 meters | ||
| a hook: | Leg strap detection switch, prompt sound and level gauge | Lifting amplitude: | 5.2 meters | ||
| Basic upper configuration - Leg support | |||||
| Leg form: | Front and rear H-shaped | Support leg material: | Profile Q345B/5mm | ||
| Leg span: | Vertical 3360mm; Horizontal 2820 | Hydraulic lock: | Four leg belt with bidirectional hydraulic lock | ||
| Leg detection: | Leg strap detection switch, prompt sound and level gauge | Leg strobe light: | (Red) 2 pieces | ||
| Basic configuration for installation - carriage | |||||
| Material Science: | High quality carbon steel, covered with 3mm anti slip patterned aluminum plate | hold-all: | 800 * 400 * 400 with stainless steel locking components | ||
| Side and rear protection: | High quality carbon steel mold stamping forming, high strength | Hand washing box: | Plastic water tank | ||
| Basic configuration for installation - turntable | |||||
| Standing arm: | Made by welding low-alloy steel plates together | Rotating support: | Single row four point contact ball with external teeth | ||
| Reducer: | Turbine worm type, CW-28 | Motor: | BMP-50 | ||
| Basic configuration for installation - homework bucket | |||||
| Rated load: | ≤200(kg) | Dimensions (length * width * height): | 1080*620*1150 | ||
| Safety belt: | a pair | Leveling form: | Mechanical leveling | ||
| Leveling device: | External pull rod mechanical leveling | ||||
| Basic Installation Configuration - Hydraulic System | |||||
| Hydraulic oil tank: | 65L; with liquid level gauge | Gear pump: | Quantitative pump; Flow rate 25m1/r | ||
| working pressure: | Equipped with a pressure gauge; 16MPa | Hydraulic group valve: | Integrated solenoid valve group | ||
| Cylinder: | 10 pieces, equipped with bidirectional balance valve or hydraulic lock locking | ||||
| Install Basic Configuration - Operating System | |||||
| Legs: | Manual operation, individually adjustable, interlocking for boarding and disembarking | Operation method: | Combination of manual and electric | ||
| Arm arm movement: | Electric dual position operation of turntable and suspended basket | Engine start and stop: | Dual position operation of turntable and homework bucket | ||
| Engine throttle: | Manual cable pulling | ||||
| The main features of the 13 meter aerial work platform are: | |||||
The car adopts the international Jiangling high-end chassis and is equipped with a three section folding arm hydraulic lifting special device Environmental protection measures meet the Stage IV emission standards for motor vehicles Adopting domestic and imported directional valves and hydraulic cylinders, the directional control is smooth, the operation is flexible and convenient, the hydraulic system realizes interlocking of the upper and lower vehicles, overload protection, and cylinder safety self-locking. The system is equipped with an overload protection valve, and the oil pressure automatically unloads when it exceeds the set value. Dual station operation of turntable and working platform Leg and working arm interlock, safe and reliable to prevent misoperation H-shaped legs, with a large span and good stability, the legs can be extended, retracted, and intermodal. They are equipped with leg flashing lights, which are used to indicate the shape of the legs during operation and emit light signals Automatic leveling of the work bucket, external pull rod for forced balancing Equipped with 1T suspension hook |
|||||
| Q1: I want the front two tires are bias tires and the rear 9 tires are radial tires, is it ok ? |
| A: We can make the tires as your requirement to suit your country's need. |
| Q2: What about your products quality ? |
| A: Quality is our culture! "Our factory has advanced production technology and management team! We always attach great importance to quality controlling from the very beginning! |
| Q 3: Can i have samples of this type of flatbed semi trailer to test the quality ? |
| A: Yes, you can buy any samples to test the quality,our MOQ is 1 unit. |
| Q 4: What others we can do ? |
| A: According to your order, we will provide the best price and quality trucks and trailers. And we are well capable in offering overseas after-sales service. Besides, we also provide rational packing and shipping program,let shipment save money and security. |
| Q 5: How to guarantee customers get the goods smoothly after they pay ? |
| A: Don't worry, dear. We have been in this field for 10 years, we will send you production photos once in a while, and we will help you to book the latest ship. |
| Q 6: What's the delivery time ? |
| A: The delivery time is within 15 working days after receiving your advance payment. |
| Q 7: Can you supply some quick-wear truck or semi trailer parts ? |
| A: Yes, we can supply truck and semi trailer parts as your request,such as oil filter, fuel filter, air filter, traction, traction pin, balance beam and semi-trailer plate spring, hanging accessories, turntable, all kinds of trailer brake pads, brake pan, bearings etc. |
| Q 8: Do you have any used truck and semi trailer for sale ? |
| A: We have some trucks and trailers in stock for choice, from 2010-2016 year, the price are favorable. We'll show you our stock if you need. |
| Q 9: Which INCOTERMS 2010 TERMS can we work ? |
| MAOWO is a professional and sophisticated international player, can handle all INCOTERMS 2010 terms, and we normally work on FOB, CFR, CIF, CIP, EXW. |
| Q 10: What logistics ways we can work for shipment? |
| A: We can ship construction machinery by various transportation tools. (1) For 80% of our shipment, we will go by sea, to all main continents such as South America, Middle East, Africa, Oceania etc. Either by container or RoRo/Bulk shipment. (2) For neighborhood countries of China, such as Russia, Mongolia, Kazakhstan, Uzbekistan , Vietnam, Laos etc.,we can ship construction machinery by road or railway. (3) For light spare parts in urgent demand, we can ship it by international courier service, such as DHL, TNT, UPS, or Fedex. |
){kind=link}