Hubei Zhongbang Intelligent Automobile Co., Ltd. is an important branch of CLW Group, located in Suizhou City, Hubei Province, China. CLW Group is one of the largest manufacturers authorized by the Ministry of Industry and Information Technology of China to produce specialized trucks, and is a designated manufacturer and seller of specialized vehicles by the Chinese government. We specialize in producing and selling various road sweeper series. Suitable for street sweepers, power plants, steel mills, property management, residential areas, logistics parks, etc. (there are also various types of pure electric new energy sweepers); Suitable for places with large amounts of dust and dry ash (such as coal yards, mining areas, transfer yards, chemical fiber industrial parks, brick factories, etc.), dry and wet dual-use vacuum cleaners, deep cleaning vehicles, road pollution removal vehicles (there are also various new energy pure electric series). The car models can be selected from Dongfeng, Foton, Jiefang, Jianghuai, Jiangling, China National Heavy Duty Truck Group, Shaanxi Automobile and other full range models.
Our company's road sweepers have high work efficiency and are highly favored by both new and old customers. The company's trucks have been sold to over 80 overseas countries and regions including China, Asia, Africa, South America, and the Middle East, such as Russia, Kazakhstan, Nigeria, Chile, Malaysia, and Argentina.
SWEEPING TRUCK
Washing car is a road cleaning vehicle in the road sweeper series, with road cleaning, road cleaning curb and curb facade washing, low pressure washing, spray dust removal and other functions. The vehicle can be used as a road sweeper for road cleaning and suction; and as a high pressure flushing vehicle; the combination of road cleaning and high pressure flushing as a combination of cleaning, high pressure flushing and suction to meet the needs of different users. The vehicle can be widely used for the daily cleaning, washing and cleaning of main roads and viaduct roads.
High performance and environmental protection:
Wash car using high pressure water and tilt brush will sweep the front of the suction cup, under the negative pressure of the fan, air in the closed circuit garbage inhalation bin storage, the whole process is physical principle, will not produce chemical waste or garbage leakage secondary pollution to the environment, at the same time, after the spray dust effectively reduce the dust concentration in the air, solve the problem of dust pollution. Wash cleanliness is high, the model function can solve different road environment, a job washing efficiency above 98%, washing function, washing function, roadside cleaning function, spray function, low pressure washing function and using the suction cup + spray rod cleaning way, to the page, hook, corner, curb of the dust, garbage can effectively clean, ensure a clean environment.
Safe intelligence, easy to operate:
1. The advanced "intelligent screen + CAN bus" electronic control system is adopted to integrate on-site monitoring, fault alarm and diagnosis display, synchronized with the operation animation display of physical objects, and the main function is one-key operation.
2. Equipped with intelligent voice alarm system, which can monitor and alarm the abnormal situations and illegal operations such as water shortage, water dustbin full water, hydraulic oil leakage, and abnormal dustbin recovery, so as to ensure the normal operation of the machine and prevent the occurrence of accidents.
3. The rear monitoring system to assist the driver in safe operation.
4. The left and right high pressure side spray rod has two-way automatic obstacle avoidance protection and reset function. It can greatly reduce the damage of the left and right high pressure side spray rod, and the safety of the vehicle is also greatly improved during operation.
5. With reversing protection device. In case of emergency reversing during the operation, the intelligent control system will automatically stop the operation and withdraw the sweep plate, suction cup and side spray rod.
Wide range of operations:
From dozens of microns to 80-100mm stones, bricks, leaves, beverage bottles and other sundries, a operation can be all removed. Road cleaning width is 3500mm, Cleaning capacity 40000 sq / h-60000 square / h.
| Vehicle name |
Shaanxi Auto 15 cubic road sweeper |
model number |
ZB5182XSEX5 |
| gross mass |
18000kg |
curb weight(Kg) |
12000kg-11550kg-11100kg |
| Rated quality |
5870-5805-6320-6255-6770-6705kg |
wheel base |
5100mm |
| Waterbox volume |
9m³ |
Dumpster volume |
7m³ |
| Tyre model |
10.00R20 18PR |
Clean the width(mm) |
3000-3500 |
| Emission standards |
Euro II Euro III Euro IV Euro V |
| Vehicle size |
8925*2530*3150mm |
| engine |
horsepower(ps) |
240HP |
| displacement(ml) |
4580 |
| The secondary engine |
model number |
Dongfeng Cummins B170 |
| power(kw) |
125 |
horsepower(ps) |
170 |
| displacement(ml) |
5900 |
Special performance parameters |
Garbage bin volume (m 3 ) |
7 (stainless steel material) |
| Clean water tank volume (m 3 ) |
9 (stainless steel material) |
| Sweeping width (mm) |
2800-3200 |
| Sweeping operation speed (km/h) |
3-15 |
| Cleaning operation speed (km/h) |
15-20 |
| Maximum sweeping capacity (m 2/h) |
48000 |
| Suction capacity |
Density (g/cm 3) |
2.0 |
| Weight (kg) |
1.5 |
| Suction particle size (mm) |
≥100 |
| Garbage bin dumping angle |
≥45° |
| Sweeping efficiency |
≥96% |
| Operating noise (db) |
< 88 complies with GB7258 regulations |
| Driving performance parameters |
Drive type |
4×2 rear axle drive |
| Suspension type |
Leaf spring |
| Number of leaf spring plates (front/rear) |
8/10+7 |
| Braking system |
Dual-circuit air brake, drum type |
| Braking distance (fully loaded at 30 km/h) |
≤10m |
| Maximum speed (km/h) |
99 |
| Minimum turning radius (m) |
8 |
| Maximum climbing gradient |
≥30% |
| Clutch system |
Single dry diaphragm spring clutch, hydraulic operation |
| Transmission system |
Mechanical 5-speed transmission with synchronizer, manual |
| Engine fuel consumption |
Driving (L/100 km) |
Operation (L/h) |
Operation (L/10,000 m 2) |
| ≤14 |
≤8 |
≤5 |
| Dust suppression system |
Spraying method |
Low-pressure mist |
| Main component composition |
Imported high-pressure pump, water filter, pipelines, stainless steel spray frame, high-pressure nozzles, etc. |
| High-pressure water pump |
GTM |
| Installation location |
Sweeping dust suppression |
Left and right front sweeping discs |
| Vacuum dust suppression |
Suction cup air inlet |
| Control type |
Electronic control, one-button operation |
| Hydraulic system |
Type |
Open type, electric control centralized operation |
| Main components |
Gear pump, cycloidal motor, hydraulic cylinder, solenoid valve, integrated block, high-pressure pump, etc. |
| Cycloidal motor |
Sanyo motor |
| Gear oil pump |
Changyuan Machinery |
| Hydraulic oil cylinder |
Haipulisi |
| Hydraulic cylinder sealing elements |
Dingji |
| Hydraulic oil pipe |
Tianhe |
| Electromagnetic valve group |
Haipulisi |
| Shockproof pressure gauge |
IMT |
| Return oil filter |
Sofima |
| System overflow pressure |
Mpa |
10-12 |
| Hydraulic oil tank capacity |
L |
≥60 |
| Electrical system |
System composition |
Composed of the chassis vehicle electrical circuit, auxiliary engine electrical components, and the operation control circuit of the specialized working devices. |
| Chassis vehicle system voltage (V) |
24 |
| Working device system voltage (V) |
12 |
| Composition of the electric control box panel |
Auxiliary engine tachometer, auxiliary engine water temperature gauge, engine oil temperature alarm device, various operation control switches |
| Control switch |
Shanghai |
| Programmable Logic Controller |
Baijiafu |
| Circuit breaker |
Haige |
| Battery model |
12V-70A.H (2 in parallel) |
| Fan system |
Type |
Special high-pressure centrifugal fan |
| Brand |
Changsha Lianyue |
| Rated working speed |
r/min |
2700 |
| Transmission Type |
Auxiliary engine, clutch, high-temperature resistant A belt drive (4 pieces) |
| Fan Belt |
Zhejiang Sanlisi |
| Automatic Clutch |
Centrifugal, imported material |
| Air Volume (m 3/h) |
5000 ~ 7800 |
| Sweeping System |
Type |
Between the front and rear axles of the chassis, a liftable and extendable vertical sweeping disc is symmetrically arranged on both sides of the frame, with the disc rotation driven by a hydraulic motor, and the speed is adjustable. |
| Main component composition |
Sweeping disc bracket, sweeping disc, oil cylinder, oil pipe, connecting rod, adjusting rod, hydraulic motor, etc. |
| Sweeping Brush Spread Diameter |
mm |
φ800-900 |
| Sweeping disc motor speed |
r/min |
140 |
| Number of sweeping discs |
2 |
| Number of brushes per sweeping disc |
22 |
| Sweeping disc tilt adjustment |
Front sweeping disc |
Forward tilt 5°~15° External tilt 5°~10° |
| Rear sweeping disc |
Forward tilt 5°~10° Internal tilt 5°~10° |
| Suction nozzle device |
Type |
The suction nozzle is suspended between the rear wheels of the chassis, consisting of the suction nozzle, roller, and suction pipe. The suction nozzle body can move with the surface, and the height of the suction nozzle is controlled by an oil cylinder for a dual-suction wide nozzle, which includes a long spray bar with high-pressure nozzles (8 nozzles in total). The suction nozzle body follows the road surface. The hydraulic drive is electrically controlled for automatic adjustment of the suction nozzle height, with a spring floating suspension. |
| Suction nozzle diameter |
mm |
φ180 |
| Suction nozzle brand |
NORRES |
| Drive wheel bearing |
SKF |
| Wear-resistant outer ring of the drive wheel |
Stellana |
Rigid part of the suction nozzle in working condition
Ground clearance (mm) |
5~8 |
| Wind speed of the suction nozzle (m/s) |
50 ~ 65 |
| Negative pressure of the suction nozzle (mmH 2O) |
380 |
| Other configurations |
Alarm system |
Reversing voice alarm system |
| Auxiliary operating system |
The rear is equipped with an electric control operating system to control the lifting of the large compartment and the rear door switch, preventing safety accidents caused by the user operating in the cab without being able to observe the rear situation. |
| Manual pump emergency lifting system |
In the event of a failure of the auxiliary engine that renders the hydraulic system unusable, preventing the sweeping brush, suction cup, and large compartment from lifting, the manual pump emergency lifting system can be used for operation. |
Q1.You are a factory or trading Company?
Yes, we are the overseas sales department of the factory. And welcome to visit our factory.
Q2 . Could your company modify the standard product depending on my request?
Yes. Our company is specialized in researching and designing various special-purpose vehicles and spare parts. We can provide
any product according to your demand.
Q3. Could your company totally customize products for me?
We can provide the customized-designing product meeting with any of your demands.
Q4. Could you provide the certification that we need?
We can provide various certifications associated with the truck.
Q5. How long could we receive our goods?
It depends on the product that you have ordered. If the goods are prepared, we will deliver your goods as soon as possible.
){kind=link}