| Customization: | Available |
|---|---|
| After-sales Service: | 12 Months |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Hubei Zhongbang Intelligent Automobile Co., Ltd. is an important branch of CLW Group, located in Suizhou City, Hubei Province, China. CLW Group is one of the largest manufacturers authorized by the Ministry of Industry and Information Technology of China to produce specialized trucks, and is a designated manufacturer and seller of specialized vehicles by the Chinese government. We specialize in producing and selling various road sweeper series. Suitable for street sweepers, power plants, steel mills, property management, residential areas, logistics parks, etc. (there are also various types of pure electric new energy sweepers); Suitable for places with large amounts of dust and dry ash (such as coal yards, mining areas, transfer yards, chemical fiber industrial parks, brick factories, etc.), dry and wet dual-use vacuum cleaners, deep cleaning vehicles, road pollution removal vehicles (there are also various new energy pure electric series). The car models can be selected from Dongfeng, Foton, Jiefang, Jianghuai, Jiangling, China National Heavy Duty Truck Group, Shaanxi Automobile and other full range models.
12-16m3 Vacuum Sweeper Truck Street Sweeper Truck for Sale
Description
Road sweeper(also called sweeper truck,road cleaning truck,vacuum sweeper) is a new generation of environmental protection, cleaning and suction combined with road cleaning special vehicles, mainly applicable to the city streets, municipal square, large factories and mines mechanized cleaning and cleaning operations.
Road sweeper can not only sweep garbage, but also dust and purify the air medium on the road, which not only ensures the beauty of the road, maintains the sanitation of the environment, maintains the good working condition of the road, and reduces and prevents traffic accidents. Occurrence and further extend the service life of the road surface. The road sweeper is a special sanitation vehicle equipped with sweeping systems such as sweeping brushes, and is mainly used for cleaning operations in large and medium-sized urban sanitation departments. The road sweeper greatly liberated the work intensity of sanitation workers, improved work efficiency, and reduced secondary pollution such as dust.
Feature
★ With 4 Nos of sweeping brushes in middle
★ Turntable realizes three-speed speed regulation
★ Stainless steel/carbon steel water tank,stainless steel dust tank
★ jmc auxiliary engine 78hp or cummins 140hp auxiliary engine
★ Sanyo Motor, Schneider control switch, Hypress solenoid valve group, infinitely variable automatic clutch, maintenance-free centrifugal automatic fan,
★ Tail LED arrow indicator,
★ manual pump emergency system,
★ Zoomlion Polaris electronic water pump
★ garbage lifting Tipper function.
Optional configuration:
1. Optional trash can self-cleaning function
2. Optional reversing monitoring function
3. Optional front flushing and back sprinkling functions
4. Optional dust suction pipeline at rear
★ Working width: 3M
★ Inhalation particle size: φ120mm.
★ Water tank volume: 2m³
★ Trash bin volume: 6m³
★ Maximum operating capacity: 15000/h-60000/h
Specifications
| Dongfeng Tianjin Road Sweeper | ||
| General | Vehicle Brand | CLW |
| Chassis Brand | foton | |
| Overall Dimension | 8995*2450*3250mm | |
| GVW / Kerb Weight | 5,895kg / 3,965kg | |
| Cab | Cab Capacity | 3 persons allowed |
| Air Conditioner | Air conditioner is optional | |
| Engine | Fuel Type | Diesel |
| Engine Brand | Cummins | |
| Power | 125KW/170HP | |
| Displacement | 5700ml | |
| Emission Standard | Euro III | |
| Chassis | Drive Type | 4X2, left hand drive |
| Transmission | 6-speed front, 1 reverse | |
| Wheelbase/No. of axle | 4700 mm / 2 | |
| Tyre Specification | 7.50-16 | |
| Tyre Number | 6 tyres and 1 spare tyre | |
| Max Speed | 90 km/h | |
| Paint | Metallic paint | |
| Superstructure | Water Tank | Stainless Steel |
| Dustbin Capacity | 5-7 CBM | |
| Dustbin Material | Stainless Steel | |
| Water Tank Capacity | 3000-4,000 Litres | |
| Sweeping Capacity | 42,000 m³/h | |
| Sweeping Speed | 3-15 km/h | |
| Max Sweeping Width | 2800-3500mm | |
| Brooms | 2 sets at each side, at diameter 900 mm | |
| Auxiliary Engine | JMC engine (Japanese technology) 77 HP (57 KW), super powerful |
|
| All standard accessories: Warning lights, music alarm, basic tool kit, English manual... | ||
| Optional | ** Backup alarm can be equipped. ** Camera can be equipped. ** Air blower can be of stainless steel. |
|
Special performance parameters |
Garbage bin volume (m 3 ) | 7 (stainless steel material) | ||||
| Clean water tank volume (m 3 ) | 9 (stainless steel material) | |||||
| Sweeping width (mm) | 2800-3200 | |||||
| Sweeping operation speed (km/h) | 3-15 | |||||
| Cleaning operation speed (km/h) | 15-20 | |||||
| Maximum sweeping capacity (m 2/h) | 48000 | |||||
| Suction capacity | Density (g/cm 3) | 2.0 | ||||
| Weight (kg) | 1.5 | |||||
| Suction particle size (mm) | ≥100 | |||||
| Garbage bin dumping angle | ≥45° | |||||
| Sweeping efficiency | ≥96% | |||||
| Operating noise (db) | < 88 complies with GB7258 regulations | |||||
| Driving performance parameters | Drive type | 4×2 rear axle drive | ||||
| Suspension type | Leaf spring | |||||
| Number of leaf spring plates (front/rear) | 8/10+7 | |||||
| Braking system | Dual-circuit air brake, drum type | |||||
| Braking distance (fully loaded at 30 km/h) | ≤10m | |||||
| Maximum speed (km/h) | 99 | |||||
| Minimum turning radius (m) | 8 | |||||
| Maximum climbing gradient | ≥30% | |||||
| Clutch system | Single dry diaphragm spring clutch, hydraulic operation | |||||
| Transmission system | Mechanical 5-speed transmission with synchronizer, manual | |||||
| Engine fuel consumption | Driving (L/100 km) | Operation (L/h) | Operation (L/10,000 m 2) | |||
| ≤14 | ≤8 | ≤5 | ||||
| Dust suppression system | Spraying method | Low-pressure mist | ||||
| Main component composition | Imported high-pressure pump, water filter, pipelines, stainless steel spray frame, high-pressure nozzles, etc. | |||||
| High-pressure water pump | GTM | |||||
| Installation location | Sweeping dust suppression | Left and right front sweeping discs | ||||
| Vacuum dust suppression | Suction cup air inlet | |||||
| Control type | Electronic control, one-button operation | |||||
| Hydraulic system | Type | Open type, electric control centralized operation | |
| Main components | Gear pump, cycloidal motor, hydraulic cylinder, solenoid valve, integrated block, high-pressure pump, etc. | ||
| Cycloidal motor | Sanyo motor | ||
| Gear oil pump | Changyuan Machinery | ||
| Hydraulic oil cylinder | Haipulisi | ||
| Hydraulic cylinder sealing elements | Dingji | ||
| Hydraulic oil pipe | Tianhe | ||
| Electromagnetic valve group | Haipulisi | ||
| Shockproof pressure gauge | IMT | ||
| Return oil filter | Sofima | ||
| System overflow pressure | Mpa | 10-12 | |
| Hydraulic oil tank capacity | L | ≥60 | |
| Electrical system | System composition | Composed of the chassis vehicle electrical circuit, auxiliary engine electrical components, and the operation control circuit of the specialized working devices. | |
| Chassis vehicle system voltage (V) | 24 | ||
| Working device system voltage (V) | 12 | ||
| Composition of the electric control box panel | Auxiliary engine tachometer, auxiliary engine water temperature gauge, engine oil temperature alarm device, various operation control switches | ||
| Control switch | Shanghai | ||
| Programmable Logic Controller | Baijiafu | ||
| Circuit breaker | Haige | ||
| Battery model | 12V-70A.H (2 in parallel) | ||
| Fan system | Type | Special high-pressure centrifugal fan | |
| Brand | Changsha Lianyue | ||
| Rated working speed | r/min | 2700 | |
| Transmission Type | Auxiliary engine, clutch, high-temperature resistant A belt drive (4 pieces) | ||
| Fan Belt | Zhejiang Sanlisi | ||
| Automatic Clutch | Centrifugal, imported material | ||
| Air Volume (m 3/h) | 5000 ~ 7800 | ||
| Sweeping System | Type | Between the front and rear axles of the chassis, a liftable and extendable vertical sweeping disc is symmetrically arranged on both sides of the frame, with the disc rotation driven by a hydraulic motor, and the speed is adjustable. | |
| Main component composition | Sweeping disc bracket, sweeping disc, oil cylinder, oil pipe, connecting rod, adjusting rod, hydraulic motor, etc. | ||
| Sweeping Brush Spread Diameter | mm | φ800-900 | |
| Sweeping disc motor speed | r/min | 140 | |
| Number of sweeping discs | 2 | ||
| Number of brushes per sweeping disc | 22 | ||
| Sweeping disc tilt adjustment | Front sweeping disc | Forward tilt 5°~15° External tilt 5°~10° | |
| Rear sweeping disc | Forward tilt 5°~10° Internal tilt 5°~10° | ||
| Suction nozzle device | Type | The suction nozzle is suspended between the rear wheels of the chassis, consisting of the suction nozzle, roller, and suction pipe. The suction nozzle body can move with the surface, and the height of the suction nozzle is controlled by an oil cylinder for a dual-suction wide nozzle, which includes a long spray bar with high-pressure nozzles (8 nozzles in total). The suction nozzle body follows the road surface. The hydraulic drive is electrically controlled for automatic adjustment of the suction nozzle height, with a spring floating suspension. | |
| Suction nozzle diameter | mm | φ180 | |
| Suction nozzle brand | NORRES | ||
| Drive wheel bearing | SKF | ||
| Wear-resistant outer ring of the drive wheel | Stellana | ||
| Rigid part of the suction nozzle in working condition Ground clearance (mm) |
5~8 | ||
| Wind speed of the suction nozzle (m/s) | 50 ~ 65 | ||
| Negative pressure of the suction nozzle (mmH 2O) | 380 | ||
| Other configurations | Alarm system | Reversing voice alarm system | |
| Auxiliary operating system | The rear is equipped with an electric control operating system to control the lifting of the large compartment and the rear door switch, preventing safety accidents caused by the user operating in the cab without being able to observe the rear situation. | ||
| Manual pump emergency lifting system | In the event of a failure of the auxiliary engine that renders the hydraulic system unusable, preventing the sweeping brush, suction cup, and large compartment from lifting, the manual pump emergency lifting system can be used for operation. | ||
Q1.You are a factory or trading Company?
){kind=link}